人才介绍

您当前的位置:首页 > 人才队伍 > 人才介绍
杜如虚 Ruxu Du
Email: rdu@mae.cuhk.edu.hk
Telephone:(852)2609-8054
Fax:(852)2603-6002
Fellow, Society of Manufacturing Engineers (SME)
Fellow, America Society of Mechanical Engineers (ASME)
Fellow, Hong Kong Institute of Engineers (HKIE)
Director, Institute of Precision Engineering
Professor, Dept. of Mechanical and Automation Engineering
The Chinese University of Hong Kong
Hong Kong SAR
Website: www.mae.cuhk.edu.hk/~rdu
Director,
Guangzhou Chinese Academy of Sciences Institute of Advanced Technology
1680 Binghai Road,
Nansha, Guangzhou,
Guangdong,
China
Website: www.giat.ac.cn
  • Background
  • Recognitions
  • Teaching
  • Services
  • Research
  • Publications

    Education


    • 1, 1987 – 7, 1989Ph.D., Mechanical Engineering, the University of Michigan.

    • 1, 1986 – 12, 1986Ph.D. student, Mechanical Engineering, The University of Wisconsin-Madison (transferred to U. of M. with supervisor).

    • 8, 1980 – 8, 1983M.Sc., Automatic Control, South China Institute of Technology (presently South China University of Technology).

    • 1, 1977 – 1, 1980Diploma, Electrical Engineering, Wuhang Iron & Steel Institute (presently, Wuhan University of Science and Technology).



    Working Experience


    • 7, 2011 – presentDirector, Guangzhou Chinese Academy of Sciences Institute of Advanced Technology;

    • 5, 2006 – 7, 2011Director, Precision Engineering Research Center, Chinese Academy of Sciences Shenzhen Institute of Advanced Technology;

    • 7, 2010 – 7, 2011Director, Advanced Materials Research Center, Chinese Academy of Sciences Shenzhen Institute of Advanced Technology;

    • 9, 2005 – presentDirector, Institute of Precision Engineering, Chinese University of Hong Kong

    • 8, 2002 – presentProfessor, Dept. of Mechanical and Automation Engineering, the Chinese University of Hong Kong.

    • 3, 2001 – 8, 2001Associate Professor, Dept. of Mechanical and Automation Engineering, the Chinese University of Hong Kong.

    • 6, 1999 – 12, 2001Associate Professor, Dept. of Industrial Engineering, University of Miami.

    • 7, 1998 – 7, 1999Visiting Associate Professor, Dept. of Mechanical and Automation Engineering, Chinese University of Hong Kong.

    • 9, 1997 – 1, 1998Senior Fellow (on Sabbatical Leave), Dept. of Mechanical and Production Engineering, National University of Singapore.

    • 7, 1995 – 7, 1999Associate Professor, Dept. of Industrial and Manufacturing Systems Engineering, University of Windsor.

    • 7, 1991 – 6, 1995Assistant Professor, Dept. of Industrial Engineering, University of Windsor.

    • 6, 1989 – 7, 1991Post Doctoral Fellow, Dept. of Mechanical Engineering, McMaster University.

    • 1, 1987 – 7, 1989Research Assistant, Dept. of Mechanical Engineering and Applied Mechanics, University of Michigan.

    • 5, 1987 – 7, 1987Computer Programmer, Department of Economics, University of Michigan.

    • 1, 1986 – 12, 1986Research Assistant, Dept. of Mechanical Engineering, University of Wisconsin-Madison.

    • 8, 1986 – 12, 1986Computer Programmer, University of Wisconsin-Madison, VA Hospital, Animal Research Facility.

    • 8, 1983 – 12, 1985Associate Lecturer, Dept. of Automation, South China Institute of Technology.

    • 1, 1980 – 8, 1980Assistant Engineer, Guangzhou Metallurgy Research Institute.



    Honors and Awards


    • 深圳市孔雀计划入选者,2013;

    • 广州市领军人才入选者,2013;

    • 中国中组部千人计划入选者,2012;

    • Fellow, Hong Kong Institute of Engineers, 2012;

    • Fellow, Society of Manufacturing Engineers, 2012;

    • 广东省领军人才入选者, 2011;

    • Senior Consultant, Hong Kong Metal Manufacturers Association, 2010;

    • Fellow, America Society of Mechanical Engineers, 2009;

    • Certificate of Merit, “Hybrid Controllable Mechanical Metal Forming Press,” Hong Kong Industry Award, 2009;

    • Excellent Technology Transfer Award, “Dieless Sheet Metal Forming,” China International Hi-Tech Expo, 2008;

    • Best of the Best CLP (China Light and Power) Renewable Energy Award, “Solar Energy Driven Absorption Air Condition System,” CLP Renewable Energy Award, 2007;

    • 华南理工大学客座讲座教授, 2010-2013;

    • 深圳清华大学研究院客座教授, 2006-2008;

    • 河北科技大学客座教授, 2005-2008;

    • 燕山大学客座教授, 2004-2007;

    • 福州大学客座教授, 2003-2006;

    • Honorary Senior Technical Consultant, Shanggong Group Ltd., 2003;

    • Honorary Senior Member, Shanghai Sewing Machine Manufacturers Association, 2003

    • Who’s Who in Science and Engineering, 21st Century Edition, 1999;

    • Stratmore's Who is Who in the World, 1999.


    Keynote Speeches


    1. “Under-Actuated Flexible Wire-Driven Mechanism and Highly Efficient Propulsion in Water,” 第九届全国机构与机械学年会,太原,山西,2014年7月9-12日。

    2. “Under-Actuated Flexible Wire-Driven Mechanism and Highly Efficient Propulsion in Water,”2013, International Conference on Mechatronics, Robotics and Automation (ICMRA 2013), Guangzhou, Guangdong, June 14-15, 2014.

    3. “The Science and Art of Condition Monitoring and Fault Diagnosis,” International Conference on Mechatronics and Control Engineering, Nov. 29-30, Guangzhou, China.

    4. “The New Metal Forming Machines and Processes,” The 2nd International Conference on Engineering and Technology Innovation 2012, Kaohsiung, Taiwan, Oct. 29 – Nov. 3, 2012.

    5. “Super Eyes – Micro-Lens Array and Its Applications,” 3M-Nano 2012, Xi’an, Shannxi, China, Aug. 29 – Sept. 1, 2012

    6. “The New Metal Forming Machines and Processes,” 2012 Int. Conf. on Advanced Design and Manufacturing Engineering, Taiyuan, Shanxi, Aug. 16 – 18, 2012.

    7. “香港机械工程教育与一种新教学方法的探讨,” 中国机械工业教育协会机械电子工程分会年会, 珠海,广东,2011年,12月10-12日。

    8. “The Art and Science of Mechanical Watch and Clock,” 2011 Asian Society of Precision Engineering Annual Conference, Hong Kong SAR, Nov. 16, 2011.

    9. “中国与美国机械工业发展的比较与反思,” 第九届全国机构与机械学年会,西安,陕西,2011年11月5-6日。

    10. “Condition Monitoring and Fault Diagnosis Methods,” Informatics and Control Technology Conference 2011, Hong Kong SAR, Sept. 9, 2011.

    11. “The Science and Art of Condition Monitoring and Fault Diagnosis in Manufacturing,” Int. Conf. on Future Information Technology and Management Engineering (FITME 2010), Changzhou, China, Oct. 8 – 9, 2010.

    12. “香港自动化工程教育与一种新教学方法的探讨,” 全国测量技术论坛,天津,2009年,11月,11-15日.

    13. “Lotus Water – A New Technology for Desalination,” The 6th International Tubochemistry Conference, Lanzhou, China, Sept. 14 – 16, 2009.

    14. “香港机械工程教育与一种新教学方法的探讨,” 全国高等教育协会第4届机械工程分会年会, 南京,江苏,2009年5月9-11日.

    15. “NEMS and Mechanical Watches,” 3rd IEEE-NEMS, Sanya, Hainan, China, Jan. 6 – 9, 2008.


    Invited Talks


    1. “A Comparison Study on the Manufacturing Industry in China and USA”
      ◆South China University of Technology, Dec. 2010

    2. “The Science and Art of Mechanical Watches”
      ◆广东省科技馆,2012年9月
      ◆South China University of Technology, June 2010
      ◆National Cheng Kung University, May 2010
      ◆Southeast University, Sept. 2009
      ◆Xi’an Jiaotong University, July 2007
      ◆Henan University, July 2006
      ◆Harbin Institute of Technology, May 2006

    3. “The Science and Art of Engineering Monitoring and Fault Diagnosis”
      ◆Hebei University, Aug. 2005
      ◆Xi’an Jiaotong University, June 2004.
      ◆Guilin University of Electronic Technology, April 2004.
      ◆Hefei University of Science and Technology, Oct. 2003
      ◆Yanshang University, July 2003
      ◆Shandong University, Oct. 2002
      ◆The Institute of Systems Science, Chinese Academy of Science, Dec. 2001
      ◆School of Electrical Engineering, Beijing Post and Telecommunication University, Dec. 2001
      ◆Dept. of Manufacturing Engineering, City University of Hong Kong, Hong Kong, Dec. 1997.
      ◆Dept. of Mechanical and Production Engineering, National University of Singapore, Singapore, Oct. 1997.
      ◆Dept. of Mechanical Engineering, University of Victoria, B. C., Canada, June 1997.
      ◆School of Electrical and Computer Engineering, South China University of Technology, China, June 1996.
      ◆Dept. of Mechanical Engineering, Southeast University, China, June 1996.
      ◆Dept. of Industrial Engineering, Korean Institute of Science and Technology, Korean, May 1996.
      ◆Division of Manufacturing Automation, LG Industry, Korean, May 1996.
      ◆Dept. of Mechanical Engineering, Concordia University, Montreal, QC, June 1995.

    4. “The Design of the Next Generation of Metal Forming Press,”
      ◆Shanghai Jiaotong University, Dec. 2009
      ◆University of California, Los Angeles, Sept. 2005
      ◆Harbin University of Technology, July 2005
      ◆Hebei University of Science and Technology, July 2003

    5. “Condition Monitoring and Fault Diagnosis in Manufacturing,” Kistler AB, Swiss, July 2001.

    6. “Intelligent On-Line Monitoring of Stamping Operations,” Hong Kong Metal Manufacturers’ Association, Hong Kong, June 2001.

    7. “Design and Manufacturing of Industrial Sewing Machines,” Shanghai Sewing Machine Manufacturers' Association, Aug. 2000.

    8. “The Recent Development in Metal Cutting,” Society of Manufacturing Engineers (SME), Windsor Chapter Technical Meeting, April 1996.

    9. “The Science and Art of Cutter Path Generation,” Canadian Mold Makers Association, Nov. 1995.

    10. “The Art of Tool Condition Monitoring,” Institute for Machinery Research, National Research Council of Canada, Ottawa, Canada, June 1995.

    11. “Machining Data Bank,” SME and Institute of Industrial Technology (IIT) workshop, Ann Arbor, MI, Dec. 1993.


    Best Papers


    1. Baofen Liao, Zheng Li, and Ruxu Du, “Robot Tadpole with a Novel Biomimetic Wire-Driven Propulsor,” IEEE-ROBIO 2012, Final List of the Best Papers, Dec. 11-14, 2012, Guangzhou, China.

    2. Man-Cheong Lei and Ruxu Du, “Geometry Modeling and Simulation of the Wire-Driven Bending Section of a Flexible Ureteroscope,” Proceedings of the World Congress on Engineering and Computer Science 2011, Certificate of Merit, Oct. 19-21, 2011, San Francisco, USA.

    3. He Mao, Kai He, Qun Luo, and Ruxu Du, “Theoretical and Experimental Analysis on Deformation of Sheet Metal under Waterjet Impact Loading,” IEEE International Conference on Information and Automation (ICIA 2011), Finalist of the best paper, June 6-8, 2011, Shenzhen, China.

    4. Y. X. Luo, Q. B. He, S. Su, and R. Du, “A Study on the Noise of a Multi-bar Mechanical Press” Asian International Symposium on Mechantronics (AISM 2008), Finalist on the Best Student Paper, Aug. 27 – 31, 2008, Sapporo, Japan.

    5. J. M. Gong, C. Y. Choi, K. W. Wong, and R. Du, “Functionalized Multi-Walled Carbon Nanotube Coating on Mainspring with Reinforced Mechanical Strength,” Finalist Paper, IEEE NANO 07, Hong Kong SAR, Aug. 2-5, 2007.

    6. S. Su and R. Du, “Signature Analysis of Mechanical Watch by Reassigned Scalogram,” Best Student Paper, The 2007 International Conference of Signal and Image Engineering, July 2-4, 2007, London, UK.

    7. Etta C. Y. Liu and R. Du, “ "Frame-Based Expert System for Label Pattern Design", Best Student Paper, Proceedings of the 10th WSEAS International Conference on Computers, pp. 795-799, Vouliagmeni, Athens, Greece, July 13-15, 2006.


    Awards for Supervised Students


    1. Zheng Li, Champion, Sir Charles Gao Technology Innovation Competition, CUHK, 2013.

    2. Yuanxin Lao, 2nd Place, Technology Innovation Competition, CUHK, 2010.

    3. Peng Zhang, Champion, Green Energy Technology Innovation Competition, CUHK, 2010.

    4. Sunny N. C. Chan, Outstanding Award, Chinese National University Student Innovation Challenge Cup, 2007.

    5. Jian Liang, Best Ph.D. Thesis Award, Faculty of Engineering, CUHK, 2006.


    Undergraduate courses taught


    1. Engineering Design and Optimization

    2. Engineering Product Design

    3. Manufacturing Technology

    4. Advanced Manufacturing Systems

    5. Robotics

    6. Manufacturing Systems Analysis and Design

    7. Computer-Aided Manufacturing

    8. Probability and Statistics

    9. Engineering Practice

    10. Information Processing for Automation

    11. Flexible Manufacturing Systems

    12. Manufacturing Technology

    13. Engineering Statistics

    14. CAD/CAM

    15. Systems Analysis and Design

    16. Operations Research I

    17. Operations Research II


    Graduate courses taught


    1. Engineering Design and Optimization

    2. Design Process and Optimization

    3. Measurement and Instrumentation

    4. Robotics

    5. Manufacturing Systems Analysis and Design

    6. Advanced Manufacturing Technology

    7. Computer Integrated Manufacturing

    8. Time Series and Modern Spectral Analysis

    9. Flexible Manufacturing Systems (a session of two weeks)

    10. Automated Machining (a session of two weeks)

    11. Automated Inspection (a session of three weeks)

    Journal Editorship


    • Member of Editorial Board, 2010 – , J. of Nano Energy and Power Research, website: http://www.aspbs.com/jnepr.htm

    • Member of Editorial Board, 2010 – , Intelligent Control and Automation, website: http://www.scirp.org/journal/ica/

    • Member of Editorial Board, 2008 – , Int. J. of Kinematics, Dynamics and Control of High-Performance Machines, http://www.serialspublications.com/journals1.asp?jid=276.

    • Associate Editor, 2008 – , Control Theory and Applications (English and Chinese), website: http://www.jcta.ac.cn/cta_en/ch/index.aspx

    • Associate Editor, 2005 – , CAD & Application, website: http://www.cadanda.com/

    • Associate Editor, 2002 – , Int. J. of Control and Intelligent Systems, website: http://www.actapress.com/Content_Of_Journal.aspx?JournalID=85

    • Member of Editorial Board, 2001 – , Int. J. of Power and Energy Systems, website: http://www.actapress.com/Content_of_Journal.aspx?JournalID=128

    • Associate Editor, 1999 – , J. of Machine Design and Mechanism (Chinese).


    International Conference Organization


    • Chairman, The 2nd International Forum on Micro-Manufacturing, Dec. 17-18, 2012, Shenzhen, China.

    • Chairman, Second Asia International Symposium on Mechantronics, Dec. 12 – 15, 2006, Hong Kong.

    • Technical program committee member, The 9th IEEE Int. Conference on Computer Science & Education (IEEE ICCSE 2014), Aug. 22 – 24, 2014, Vancouver, Canada.

    • Advisory committee member: International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO), Aug. 29 – Sept. 1, 2012, Xi'an, China.

    • Organizing committee member: Second ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2012), July 2012, Tianjin, China.

    • Program committee member: The 2012 IASTED International Conference on Control and Applications, June 18-20, 2012, Crete, Greece.

    • Program committee member: 2012 International Symposium on Flexible Automation (ISFA 2012), St. Louis, Missouri, USA, June 18 - 20, 2012.

    • Steering Committee member: The 9th International Mechanisms and Machine Science Conference, Oct. 14 – 17, 2011, Xi’an, China.

    • Organizing Committee Member, IEEE International Conference on Information and Automation & International Symposium on Integration Technology, June 6 – 8, 2011, Shenzhen, China.

    • International Program Committee Member, International Conference on Control and Applications (CA 2011), June 1 – 3, 2011, Vancouver, BC, Canada

    • Scientific Committee Member, The 6th International Conference on MicroManufacturing (ICOMM 2011), March 7 – 10, Tokyo, Japan.

    • International Organizing Committee member, International Forum on Micro Manufacturing 2010, Oct. 20 – 23, Gifu, Japan.

    • International Steering Committee member, the First IFTOMM Asian Conference on Mechanism and Machine Science, Oct. 21 – 25, 2010, Taipei, Taiwan.

    • International Scientific Committee member, The 9th International Conference on Frontiers of Design and Manufacturing, July 17 – 20, 2010, Changsha, China.

    • Program committee member, International Symposium on Flexible Automation, July 12-14, 2010, Tokyo, Japan.

    • Organizing committee member, the 8th Strait Manufacturing Technology Workshop, Oct. 21 – 23, 2010, Taipei, Taiwan.

    • Organizing committee member, Asian-Pacific Symposium for Precision Engineering and Nanotechnology (ASPEN), 11-13 November 2009, Kitakyushu, Japan.

    • International program committee member, International Conference on Identification, Control and Applications (ICA 2009), Aug 17, 2009 to Aug 19, 2009, Honolulu, Hawaii, USA.

    • Organizing committee member, the 7th Strait Manufacturing Technology Workshop, Nov. 17 – 18, 2008, Hong Kong SAR.

    • Organizing committee member, 2008 IEEE International Conference on Automation and Logistics, Sept. 1 – 3, 2008, Qingdao, China.

    • Organizing committee member, the 6th Strait Manufacturing Technology Workshop, Aug. 17 – 18, 2007, Baoji, China.

    • Organizing committee member, IEEE International Conference on Integration Technology,(IEEE- ICIT) 2007, March 22 – 24, 2007, Shenzhen, China.

    • Program committee member, 2006 International Conference on Intelligent Robots and Systems (2006 IROS), Oct. 9 – 15, 2006, Beijing, China.

    • Organizing committee member, CAD&A 2006, June 21 – 23, Phuket, Thailand.

    • Organizing committee member, 2005 International Conference on Advanced Manufacture (ICAM2005), November 28 - December 02, 2005, Taipei, Taiwan.

    • Organizing committee member, 2005 IEEE Int. Conference on Information Acquisition, June 27 – July 3, 2005, Hong Kong

    • Organizing committee member, Int. Symposium on Collaborative Research in Applied Science, 7-9 October 2005, Vancouver, Canada

    • Chairman, Guangdong – Hong Kong Symposium for Advanced Manufacturing and Precision Equipment Technology, June 2005, Shenzhen, China.

    • Organizing committee member, IEEE ROBIO 2005, June-July 2005, Hong Kong

    • Organizing committee member, International Symposium on Collaborative Research in Applied Science, Oct. 2005, Vancouver, Canada.

    • Organizing committee member, First Asia International Symposium on Mechatronics Sept. 2004, Xi’an, China.

    • Session Chair, Sixth World Congress on Computational Mechanics, Sept. 2004, Beijing, China.

    • Organizing committee member, 2004 Japan – USA Symposium on Flexible Automation, July 2004, Denver, Colorado, USA

    • Session Chair, IEEE Intelligent Automation and Control, 2003, Dec. 2003, Hong Kong

    • Session Chair, IEEE International Conference on Robotics, Intelligent Systems and Signal Processing, Changsha, Hunan, China, Oct. 2003.

    • Organizing committee member, 2002 Japan – USA Symposium on Flexible Automation, July 2002, Hiroshima, Japan

    • Session Chair, The 5th Int. Conference on Frontier Research in Manufacturing (The 5th S. M. Wu Symposium on Manufacturing Science and Engineering), Dalian, China, June 2002.

    • Session Chair, The 3rd International Conference on Metal Cutting and High Speed Machining, Metz, France, 2001

    • Session Chair, The 4th Int. Conference on Frontier Research in Manufacturing (The 4th S. M. Wu Symposium on Manufacturing Science), Nanjing, China, 2000.

    • International Program Committee member, The International Federation for Information Processing, Session TC5, Detroit, 1999.


     

    Research Interests


    • Manufacturing machines and processes: sheet metal stamping and metal cutting;

    • On-line monitoring, diagnostics and control of manufacturing processes and systems;

    • Energy and nano materials


    Research Grant Summary (as Principal Investigator)


    • In Mainland ChinaRMB¥16,000,000

    • In Hong KongHK$79,763,391

    • In USA and CanadaUS$819,801

    • Total:HK$106,062,015


    Summary


    1. Books: 4

    2. Special issues edited: 2

    3. Chapters in books : 11

    4. Journal papers: 174

    5. Conference papers: 178

    6. Patents: 60

    7. Technical reports: 14


    Books


    • Ruxu Du and Longhan Xie, The Mechanics of Mechanical Watches and Clocks, Springer, 2012.

    • 谢龙汉,杜如虚,《CATIA V5 R20产品造型与设计》,精益工程视频讲堂(CAD/CAM/CAE),清华大学出版社,ISBN: 9787302246565, 2011年。

    • 尚涛,谢龙汉,杜如虚,《MATLAB工程计算与分析》,精益工程视频讲堂(CAD/CAM/CAE),清华大学出版社,ISBN: 9787302246107, 2011年。

    • 姚健娣,谢龙汉,杜如虚,《SolidWorks 2010三维设计及制图》,精益工程视频讲堂(CAD/CAM/CAE),清华大学出版社,ISBN: 9787302246114, 2011年。


    Special Issues Edited


    • Ruxu Du, Norio Takatsuji, Zifu Li and Jiaying Xu, ed., Micro Manufacturing Techniques and Applications, a special issue in Applied Mechanics and Materials, Trans. Tech Pubications Ltd., Switzerland, 2013.

    • Shuhui Yu, Rong Su and Ruxu Du, ed., Functional Nanocomposite Materials, a special issue in Materials Science Forum, Trans Tech Publications Ltd., Switzerland, 2012.


    Chapters in Books and Special Issues


    • Yuanxin Luo, Kai He and R.Du, “A New Rapid Prototyping Process for Sheet Metal Parts,” Rapid Prototyping Technology – Principles and Functional Requirements, Ed. by Muhammad Enamul Hoque, ISBN 978-953-307-970-7, InTech Inc., Switzerland, September 2011.

    • R. Du, Candy Y. X. Tang and D. L. Zhang, “Micro Assembly Technology and System,” Smart Devices and Machines for Advanced Manufacturing, ed. by Lihui Wang and Jeff Xi, Springer-Verlag, London, Jan. 2008.

    • Y. Fu and R. Du, “Chapter 3, Swiss Lever Escapement Mechanism,” Mechatronic Systems: Devices, Design, Control, Operation and Monitoring, Edited by C.W. de Silva, Taylor & Francis, CRC Press, Oct. 2007.

    • R. Du, “Monitoring and Diagnosis of Sheet Metal Stamping Processes,” Condition-based Monitoring and Control for Intelligent Manufacturing, ed. by R. Gao and Lihui Wang, ISBM 1-84628-268-3, Springer-Verlag, New York, 2006.

    • Gaoxiang Ouyang, Xiaoli Li, Xinping Guan, Zhiqiang Zhang, Xiuling Zhang, and R. Du, “Ram Velocity Control in Plastic Injection Molding Machines with Neural Network Learning Control,” Lecture Notes in Computer Science, ed. by F. Yin, J. Wang, and C. Guo, ISNN 2004, LNCS 3174, pp. 169–174, 2004.

    • R. Du, and et al., “Tool Condition Monitoring Using Transition Fuzzy Probability,” Metal Cutting and High Speed Machining, edited by Dudzinski, and et al., pp. 375 – 381, 2002.

    • R. Du and Y. S. Xu, “Monitoring and Diagnosing Manufacturing Processes Using Fuzzy Set Theory,” Computational Intelligence in Manufacturing Handbook, edited by Jun Wang and Andrew Kusiak, pp. 14-1 – 14-28, CRC Press LLC, 2001.

    • R. Du, “Wavelet Transforms for Monitoring Machines and Processes in Manufacturing System,” Computer Aided and Integrated Manufacturing Systems Techniques and Applications, Vol. 1, Systems Techniques and Computational Methods, edited by C. Leondes, pp. 8-1 – 8-30, CRC Press LLC, Boca Raton, 2001.

    • R. Du, “Fault Diagnosis,” Encyclopedia of Electrical and Electronics Engineering, edited by John G. Webster, Article No. 2608, John Wiley, 2000.

    • R. Du, “Neural Network Systems Technologies and Applications for Engineering Systems Monitoring and Diagnosis,” Industrial and Manufacturing Systems, Neural Network Systems Technologies and Applications, ed. C. T. Leondes, Vol. 4, pp. 122-143, Academic Press, San Diego, 1998.

    • R. Du, “AI Based Engineering Monitoring and Diagnosis,” Encyclopedia of Energy and Life Support Systems, 1998.


    Papers in the Journals


      2013

    • Li Zheng, Du Ruxu, “Design and Implementation of a Biomimetic Wire-Driven Underactuated Serpentine Manipulator,” Trans. on Control and Mechanical Systems, Vol. 1, No. 6, pp. 1-9, October, 2012.

    • He Mao, Kai He, Changjie Luo, Ruxu Du, “Axial Compression and Energy Absorption Characteristics of Reduction Tubes Using a Die under Impact Load,” Advanced Materials Research, Vols. 712-715, pp. 1519-1526, 2013.

    • Zheng Li and Ruxu Du, “Design and Analysis of a Bio-Inspired Wire-Driven Multi-Section Flexible Robot,” Int. J. of Advanced Robotic Systems, Vol. 10, pp. 209-220, 2013, available online at http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/design-and-analysis-of-a-bio-inspired-wire-driven-multi-section-flexible-robot.

    • Li Zheng, Du Ruxu, Zhang Yi, and Li Hua, “Robot Fish with Novel Wire-Driven Continuous Flapping Propulsor,” Applied Mechanics and Materials, Vol. 300-301, pp. 510-514, 2013.

    • 沈鹏,张玉坤,杨 昌玉,陈顺权,杜如虚,“含 PLA-PEG-PLA 三嵌段共聚物的 PLA中空纤维的制备及其性能研究,”《塑料工业》,2013年2月, http://d.wanfangdata.com.cn/Periodical_slgy201302006.aspx

    • Xiaohui Xie, Cui Ma and Ruxu Du, “Event-based Cooperative Control of a High-Speed Bar-Tacking Sewing Machine,” International Journal of Clothing Science and Technology, Vol. 25, Issue 4, available on-line at http://www.emeraldinsight.com/journals.htm?articleid=17085057.


    • 2012

    • 李赳华,何凯,罗群,毛贺,杜如虚,“一种基于高压水射流的金属板材柔性渐进成形技术,”《集成技术》,第1卷第3期第42-46页,2012年9月。

    • Cui Ma, Xiaohui Xie, Qiang Sun, Ruxu Du, “Intelligent Motion Control of Sewing Needle based on Adaptive Algorithm,” Advanced Science Letters, Vol. 14, No.1, pp. 258-261, July, 2012. http://www.aspbs.com/science/contents-science142012.htm

    • X. S. Chen, J. X. Chen, R. X. Du, “Design and Fabrication of Custom-Made Dental Implants,” J. of Mechanical Science and Technology, Vol. 26, Issue 7, pp. 1993-1998, July 2012.

    • Wenhu Yang, Shuhui Yu, Rong Sun,Ruxu Du, “Effects of BaTiO3 and FeAlSi as Fillers on the Magnetic, Dielectric and Microwave Absorption Characteristics of the Epoxy-based Composites,” Ceram. Inter. Vol. 38, Issue 5, pp. 3553–3562, July 2012.

    • He Mao, Changjie Luo, Kai He and Ruxu Du, “Numerical and experimental investigations on the expansion tube energy absorber,” Applied Mechanics and Materials, Vols. 190-191, pp. 115-120, July 2012. http://www.scientific.net/AMM.190-191.115

    • X. Zheng, S. H. Yu, R. Sun, W. H. Yang and R. X. Du, “Microstructure and Properties of Ferrite/Organic Nanocomposite Prepared with Microemulsion Method,” Special Issue on Functional Nanocomposite Materials, Materials Science Forum, ed. by Shuhui Yu, Rong Su and Ruxu Du, pp. 31-38, June 2012.

    • W. H. Yang, S. H. Yu, R. Sun and R. X. Du, “Impendance Analysis on the Percolation Mechanism of the Nickel/Calcium Copper Titanate/Polyvinylidene Fluoride Composite,” Special Issue on Functional Nanocomposite Materials, Materials Science Forum, ed. by Shuhui Yu, Rong Su and Ruxu Du, pp. 61-70, June 2012. http://www.scientific.net/MSF.722.61

    • X. L. Wu, R. Sun, P. L. Zhu and R. X. Du, “One-Pot Synthesis of Composite Nano-Capsules with Paraffin as Core and PMMA-SiO2 as Sheel by Interfacial Hydrolysis and Polymerization,” Special Issue on Functional Nanocomposite Materials, Materials Science Forum, ed. by Shuhui Yu, Rong Su and Ruxu Du, pp. 71-76, June 2012.

    • Jing Chen, Shunquan Chen, Yunmo Zhao and Ruxu Du, “Experimental Assessment of a Multi-Effect Solar Desalination System in Southern China,” Advanced Materials Research, Vols. 512-515, pp. 3-8, May 2012, http://www.scientific.net/AMR.512-515.3

    • Longhan Xie and Ruxu Du, “Harvesting Human Biomechanical Energy to Power Portable Electronics,” Advanced Materials Research, Vols. 516-517, pp. 1779-1784, May 2012, http://www.scientific.net/AMR.516-517.1779

    • Lifei Lai, Wenjin Zeng, Xianzhu Fu, Rong Sun, Ruxu Du, “Annealing effect on the electrical properties and microstructure of embedded Ni-Cr thin film resistor,” J. of Alloys and Compounds, Vol. 538, pp. 125–130, May 2012, http://www.sciencedirect.com/science/article/pii/S0925838812009437

    • Qingbo He, Ruxu Du and Fanrang Kong, “Phase Space Feature Based on Independent Component Analysis for Machine Health Diagnosis,” Trans. of ASME, J. of Vibration and Acoustics, Vol. 134, Issue 2, April 2012, http://dx.doi.org/10.1115/1.4005006

    • Wenhu Yang, Shuhui Yu, Rong Sun, Ruxu Du,“Effects of BaTiO3 and FeAlSi as fillers on the magnetic, dielectric and microwave absorption characteristics of the epoxy-based composites,” Ceramics International Vol. 38, pp. 3553–3562, Jan. 2012 http://www.sciencedirect.com/science/article/pii/S0272884211011400


    • 2013

    • Li Zheng, Du Ruxu, “Design and Implementation of a Biomimetic Wire-Driven Underactuated Serpentine Manipulator,” Trans. on Control and Mechanical Systems, Vol. 1, No. 6, pp. 1-9, October, 2012.

    • He Mao, Kai He, Changjie Luo, Ruxu Du, “Axial Compression and Energy Absorption Characteristics of Reduction Tubes Using a Die under Impact Load,” Advanced Materials Research, Vols. 712-715, pp. 1519-1526, 2013.

    • Zheng Li and Ruxu Du, “Design and Analysis of a Bio-Inspired Wire-Driven Multi-Section Flexible Robot,” Int. J. of Advanced Robotic Systems, Vol. 10, pp. 209-220, 2013, available online at http://www.intechopen.com/journals/international_journal_of_advanced_robotic_systems/design-and-analysis-of-a-bio-inspired-wire-driven-multi-section-flexible-robot.

    • Li Zheng, Du Ruxu, Zhang Yi, and Li Hua, “Robot Fish with Novel Wire-Driven Continuous Flapping Propulsor,” Applied Mechanics and Materials, Vol. 300-301, pp. 510-514, 2013.

    • 沈鹏,张玉坤,杨 昌玉,陈顺权,杜如虚,“含 PLA-PEG-PLA 三嵌段共聚物的 PLA中空纤维的制备及其性能研究,”《塑料工业》,2013年2月, http://d.wanfangdata.com.cn/Periodical_slgy201302006.aspx

    • Xiaohui Xie, Cui Ma and Ruxu Du, “Event-based Cooperative Control of a High-Speed Bar-Tacking Sewing Machine,” International Journal of Clothing Science and Technology, Vol. 25, Issue 4, available on-line at http://www.emeraldinsight.com/journals.htm?articleid=17085057.


    • 2011

    • Xianshuai Chen and Ruxu Du, “Design and Fabrication of Custom-Made Dental Implants,” Int. Conf. on Materials and Reliability 2011, Nov. 20 – 22, 2011, Busan, Korea.

    • Quanchang Li, Kai He, and Ruxu Du, “Fatigue Failure of Pure Waterjet Nozzle — A CFD and FEA Approach,” Proceeding of the 2011 Int. Conf. on Mechatronics and Materials Processing (ICMMP2011), November 18-20, 2011, Guangzhou, China.

    • Zheng Li, M. C. Lei, S. M. Yuan and R. Du, “Design and Analysis of a Biomimetic Wire-Driven Robot Arm,” 2011 ASME Mechanical Engineering Congress & Exposition, Nov. 11 – 17, 2011, Denver, Co., USA.

    • Man-Cheong Lei and Ruxu Du, “Geometry Modeling and Simulation of the Wire-Driven Bending Section of a Flexible Ureteroscope,” Proceedings of the World Congress on Engineering and Computer Science 2011, Certificate of Merit, Oct. 19-21, 2011, San Francisco, USA.

    • 张洪润,孙强,谢小辉,杜如虚,纽扣缠绕打结机设计与仿真,第9届中国机构与机器科学应用国际会议(CCMMS 2011)暨中国轻工机械协会科技研讨会,10月14-17,2011,西安,陕西,中国。

    • Zhenhua Zhao, Kai He, and Ruxu Du, “The Simulation of Scara Robot Based on OpenGL and STL,” The 2nd Int. Conf. on Mechanic Automation and Control Engineering, July 15-17, 2011, Hohhot, Inner Mongolia, China, website: http://www.maceconf.org/program.html.

    • Xiefeng Ou, Kai He, Peng Liu, and Ruxu Du, “Float State and Static Stability Analysis of the Biomimetic Robotic Dolphin Designed on the Change of the Barycenter”, The 2nd Int. Conf. on Mechanic Automation and Control Engineering, July 15 -17, 2011, Hohhot, Inner Mongolia, China, website: http://www.maceconf.org/program.html

    • 陈静、陈顺权、孟春玲、杜如虚,莲花净水 — 一个住宅小区的节能水处理系统,第九届中国城市住宅研讨会,7月8-9,2011,香港。

    • Xiaohui Xie and Ruxu Du, “Medical Assistance Robot Design for Liver Tumor,” International Conference in Electrics, Communication and Automatic Control (ECAC2011), June 23-24, 2011, Chongqing, China.

    • Xiaohui Xie and Ruxu Du, “A 3D Interventional Therapy System on Liver Tumor,” International Conference in Electrics, Communication and Automatic Control (ECAC2011), June 23-24, 2011, Chongqing, China.

    • Gongjin Lan, Kai He, and R. Du, “Research on Motion Controller for SCARA Robot Based on STM32,” 2nd World Congress on Computer Science and Information Engineering (CSIE 2011), June 17-19, 2011, Changchun, China.

    • Peng Liu, Kai He, Xiefeng Ou, and Ruxu Du, “Mechanical Design, Kinematic Modeling and Simulation of a Robotic Dolphin,” IEEE International Conference on Information and Automation (ICIA 2011), June 6-8, 2011, Shenzhen, China.

    • He Mao, Kai He, Qun Luo, and Ruxu Du, “Theoretical and Experimental Analysis on Deformation of Sheet Metal under Waterjet Impact Loading,” IEEE International Conference on Information and Automation (ICIA 2011), Finalist of the best paper, June 6-8, 2011, Shenzhen, China.

    • Xi Tang, Changjie Luo, Kai He, and Ruxu Du, “Digital Design of Low-Cost 3-DOF Prosthetic Hand,” IEEE International Conference on Information and Automation (ICIA 2011), June 6-8, 2011, Shenzhen, China.

    • S. Di, H. Lin and R. Du, “A Simple Method for Fabrication of Artificial Compound Eye,” The 6th International Conference on Micro-Manufacturing (ICOMM 2011), March 7 – 10, 2011, Tokyo, Japan.


    • 2010

    • Xiaohui Xie, Lei Zhang, Xiaofang Yu, and Ruxu Du. “Virtual Internal Treatment Planning on Liver Tumor using VTK and ITK”. The Second World Congress on Software Engineering (WCSE 2010), December 19-20, 2010, Wuhan, China.

    • Cui Ma, Xiaohui Xie, Qiang Sun, and R. Du. “Software Implementation of Bar Tracker Control System,” The Second Global Congress on Intelligent Systems (GCIS 2010), December 16-17, 2010, Wuhan, China.

    • Man-Cheong Lai and Ruxu Du, “A Study on the Bending Mechanism of the Flexible Ureteroscope,” 2010 Int. Conference on Control, Automation and Systems, Oct. 27 – 30, Gyeonggi-do, Korea.

    • Xianshuai Chen and R. Du, “A New Method for Machining Axial Symmetric / Asymmetric Parts with Experiment Validation” Proceedings of International Forum on Micro Manufacturing 2010, Oct.20-23, Gifu, Japan.

    • Lei Zhang, Hui Lin, R. Du, “A Novel Sampling Method for CCD Signal Processing”, The 3rd International Congress on Image and Signal Processing (CISP 2010), pp. 3985-3987, Oct. 16-18, 2010, Yantai, Chain.

    • Guangsen He, Tao Zhao, Rong Sun, Shuhui Yu, Ruxu Du, “Dielectric Properties of Ni/Poly (vinylidene fluoride) Composites at High Frequencies” 2010 International Conference on Electronic Packaging Technology and High Density Packaging, Aug. 16 – 19, 2010, Xi’an, China,

    • Wenhu Yang, Shuhui Yu, Rong Sun and Ruxu Du, “Dielectric Property of Nickel/Calcium Copper Titanate/Polyvinylidene Fluoride Composite,” 2010 International Conference on Electronic Packaging and High Density Packaging, Aug. 16 – 19, Xi’an, China.

    • P. H. Ko and R. Du, “Adaptive Quadrature Node Placement for Optimal Control on System of Multi-Degree of Freedom,” Accepted for publication in 2010 SICE Annual Conference, August 18-21, 2010, Taipei.

    • L. H. Xie and R. Du, “Develop a Model for Harvesting Energy from Human Foot Strike,” CAD Solutions 10, June 21 – 25, 2010, Dubai, UAE.X. S. Chen and R. Du, “A New Method for Machining Axial Symmetric / Asymmetric Parts,” The 8th Cross-strait Advanced Manufacturing Technologies Workshop, April 25 – 30, Taipei, Taiwan.

    • Hao Yu, R. Du, and et al, “Fabrication of Taper Hollow Metallic Microneedle Array for Portable Drug Delivery System,” 5th IEEE NEMS, Jan. 21 – 23, 2010, Xiamen, China.


    • 2009

    • S. Di, H. Li and R. Du, “An Artificial Compound Eyes Imaging System Based on MEMS Technology,” IEEE Robio 2009, Dec. 19 – 23, 2009, Guilin, China.

    • P. Zhang and R. Du, “A New Energy Harvesting Method Based on Knudsen Compressor”, 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Paper No. MF-04, July 11 – 15, 2009, Xi’an, China.

    • 孙强、谢小辉、马翠、杜如虚, “虚拟样机技术在套结机设计中的应用,” 第8届中国机构与机器科学应用会议(CCAMMS 2009), Aug. 18 – 22, Wuhan, China,

    • S. Di and R. Du, “The Controlling of Microlens Contour by Adjusting Developing Time in Thermal Reflow Method,” International Symposium on Photoelectronic Detection and Imaging 2009, June 17 – 19, Beijing, China.

    • J. Mao and R. Du, “Fuzzy Tolerancing Based on Available Manufacturing Resources,” CAD Solutions 09, June 8 – 12, 2009, Reno Nevada, USA.

    • Z. H. Wu and R. Du, “Miniature Vapor Compression Refrigeration System for Electronics Cooling,” The 4th Asian Conference on Refrigeration and Air-Conditioning, May 20 – 22, 2009, Taipei, Taiwan.

    • P. Zhang and R. Du, “Design and Analysis of a New Energy Harvesting Device Based on Knudsen Effect,” Clean Energy, May 3 – 7, 2009, Houston, TX, USA.

    • Xiaolin Wu, Rong Sun, Shuhui Yu, Yihai Wang and Ruxu Du, “Phase Change of Confined Sodium Sulfate Hydrates in Micro Regions,” The First International Conference on Applied Energy (ICAE09), January 5 – 7, 2009, Hong Kong SAR.

    • Peng Xiao, Wen Jung Li, Ruxu Du, “Experimental Investigation of CNT-Based Micro Bubble Generation Inside Microchannels,” 4th IEEE-NEMS, Jan. 5 – 8, 2009, Shenzhen, China.


    • 2008

    • Yuhua Guo, Yingnan Wang, and R. Du, “Ni-PTFE Electroformed Micro Parts by SU8-Based UV-LIGA,” SPIE Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems IV, Dec. 9 – 12, 2008, Melbourne, Australia.

    • Shiqing Liu, Sunny Chan, Ho Ching, Tom Ching Kong, Ruxu Du, “Development of a PC-based Millimeter Scale CNC Turning Centre with Gear Hobbing Capability,” (Paper number: MSEC-ICMP2008-72311, 2008 International Conference on Manufacturing Science & Engineering (MSEC08), October 7 – 10, 2008, Evanston, Illinois, USA.

    • Jiuha Li, Ruxu Du, Yuqi Liu, “Numerical Method for Simulating Tube Hydroforming,” Numisheet, September 1-5, 2008, Interlaken, Switzerland.

    • Y. X. Luo, Q. B. He, S. Su, and R. Du, “A Study on the Noise of a Multi-bar Mechanical Press” Asian International Symposium on Mechantronics (AISM 2008), Finalist on the Best Student Paper, Aug. 27 – 31, 2008, Sapporo, Japan.

    • H. Ching, J. Mao, L. Xie, R. Du, “Teleoperation of Inverted Pendulum Using Wave Variables in the Framework of Reflection Coefficient,” Proceedings of IEEE/SICE International Conference on Instrumentation, Control and Information Technology, August 20-22, 2008, Chofu, Japan.

    • Weizhong Guo, F. Gao, and R. Du, “The Design and Prototype of a Servo Mechanical Press with Hybrid Inputs,” 2008 Int. Conf. on Frontier of Design and Manufacturing, July 2008, Qinghuangdao, China.

    • Wei-keung Yeung, C. Kong and R. Du, “Control System Design for a New Servo Press,” IFAC World Congress, July 6 – 11, 2008, Seoul, Korea.

    • Xiaohui Xie, Ruxu Du, Qiang Sun. “Design and Simulation of a Nano-Scale Micro positioning stage,” 2008 International Conference on Modelling, Identification and Control (ICMIC 2008), June 29 – July 2, 2008, Shanghai, China.

    • Qiang Sun, Xiaohui Xie, Ruxu Du. “The Design and Kinematics Simulation of a High-speed Sewing Machine,” 2008 International Conference on Modelling, Identification and Control (ICMIC 2008), June 29 – July 2, 2008, Shanghai, China.

    • Longhan Xie, H. Ching and R. Du, “A Novel Low Cost Production Data Management System,” CAD Solutions 08, June 21 – 25, 2008, Orlando, FL, USA.

    • H. Ching, J. Mao, C. Kong, R. Du, “Improving Wave Variables Transient Response Using Input Shaping,” Proceedings of IEEE International Conference on Human System Interaction 2008, May 25-27, 2008, Krakow, Poland.

    • Xiaohui Xie, Qiang Sun, Yuanxin Luo and R. Du, “A Study of the Kinematics of Industrial Sewing Machines Using Recurdyn,” CAD Solutions 08, June 21 – 25, Orlando, FL, USA.

    • F. Yang, T. C. Tom and R. Du, “A Micro Assembly Machine for Mechanical Assembly,” IASTED on Control and Application, May 26 – 29, 2008, Quebec, Canada.

    • Q. B. He, F. R. Kong and R. Du, “ICA Based Feature Extraction from One-Dimensional Signal for Machine Condition Monitoring,” Int. Instrumentation and Measurement Technology Conference (I2MTC 2008), May 12 – 15, Victoria, Canada.

    • Yuhua Gao, Yangchao Tian and Ruxu Du, “On the Design and Fabrication of Metal Molds in LIGA,” IEEE International Conference of Nano/Micro Engineered and Molecular Systems, Jan. 6 – 9, 2008, Sanya, China.

    • Peng Xiao, Wen Jun Li and Ruxu Du, “Improvement and Initial Theoretical Analysis of Bubble Generation with CNT Heating Elements,” IEEE International Conference of Nano/Micro Engineered and Molecular Systems, Jan. 6 – 9, 2008, Sanya, China.


    • 2007

    • L. C. Tam, C. Kong and R. Du, L. C. Tam, Tom Kong and R. Du, “Physical-based Simulations of Mechanical Watches and Clocks,” ASME International Mechanical Engineering Congress and Exposition, November 11 - 15, 2007, Seattle, Washington, USA.

    • J. Qiu, J. Liang, G. M. Chen, and R. Du, “Numerical Simulation and Performance Evaluation of an Innovative Absorption Food Chilling System Powered by Solar Energy with Energy Storage,” Int. Congress of Refrigeration, August 21 – 28, Beijing, China.

    • J. M. Gong, C. Y. Choi, K. W. Wong, and R. Du, “Functionalized Multi-Walled Carbon Nanotube Coating on Mainspring with Reinforced Mechanical Strength,” Finalist Paper, IEEE NANO 07, Hong Kong SAR, Aug. 2-5, 2007.

    • Xie Xiaohui and Du Ruxu, “Research on Key Techniques of Nanometer Scale Macro-Micro Dual Drive Positioning,” 3rd SPIE Int. Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT 2007), July 8 – 12, 2007, Chendu, China.

    • S. Su and R. Du, “Signature Analysis of Mechanical Watch by Reassigned Scalogram,” Best Student Paper, The 2007 International Conference of Signal and Image Engineering, July 2-4, 2007, London, UK.

    • L. C. Tam, Y. Fu and R. Du, “Virtual Library of Mechanical Watch Movements,” CAD Solutions 07, June 25-29, 2007, Honolulu, Hawaii, USA.

    • W. Y. Chan, W. J. Xu and R. Du, “A Study on Cycloidal Gears,” CAD’07, June 25-29, 2007, Honolulu, Hawaii, USA.

    • SUN Rong, ZHAO Tao, HUANG Jiawei, ZHENG Zhi, LENG Jing and DU Ruxu, “Preparation and Application Research of Micro-structured Phase Change Materials for Highly Efficient Thermal Energy Storage,” 6TH China Urban Housing Conference, March 26- 28, Beijing, China.

    • J. Liang, and R. Du, “Research and Application of Novel Energy-Efficient HVAC Technologies in Buildings” 6TH China Urban Housing Conference, March 26- 28, Beijing, China.

    • Han Lin, Zhanrong Zhong, Xuemin Li, and Ruxu Du, “A Critical Review on Simulating Blood Flow in Human Arterial System,” 2007 IEEE International Conference on Integration Technology, paper No. 1303, March 20-24, 2007, Shenzhen, China.

    • Xie Xiaohui, Du Ruxu, Sun Lining, Du Zhijiang, “Internet Based Telesurgery with A Bone-setting System,” 2007 IEEE International Conference on Integration Technology, paper No. 1068, March 20-24, 2007, Shenzhen, China.

    • S. Su and Ruxu Du, “Signature Analysis of Mechanical Movements by Reassigned Spectrogram,” 6th WSEAS Int. Conference on Signal Processing, Robotics and Automation, Feb. 14 – 16, Corfu Island, Greece.

    • Sunny N. C. Chan, Tom Kong and R. Du, “Development of Millimeter Scale Turning Centre for Gear Hobbing,” Proceedings of APCOM 2007, p.60, Jan. 2007, Hong Kong.

    • XU Wujiao, QIN Daton, Y. Fu and R. Du, “A New Approach for Reducing the Cycloid Gear’s Sensitivity to Misalignment Errors in Precision Transmission,” Proceedings of MNC2007, MicroNanoChina07, Sanya, Hainan, China.

    • Hairong Wang, Zexiang Zhao, Zhuangde Jiang, and R. Du, “An Instrument for Measuring Mechanical Properties of MEMS Materials by Nanoindentation and Micro-Beam-Bending,” Proceedings of MNC2007, MicroNanoChina07, Jan. 10 – 13, Sanya, Hainan, China.


    • 2006

    • S. Su and R. Du, “Signature Analysis of Mechanical Watch Movements,” Second Asian International Symposium on Mechatronics, Dec. 12 – 15, 2006, Hong Kong.

    • Ching-Yeung Choi, Z. Zheng, Ka-Wai Wang, Z. L. Du, W. M. Lau and R. Du, “Use of electrochemical deposition and hyperthermal proton bombardment to fabricate multi-walled carbon nanotube adherent coatings with improved cohesive strength,” Materials Research Society Fall Meeting, Boston, Massachusetts, US, Nov. 27 to Dec. 02, 2006

    • J. Qiu, G. M. Chen, J. Liang and R. Du, “Numerical Simulation and Performance Evaluation of a Novel Solar Air Conditioning System Driven by Bubble Pump with Energy Storage,” Renewable Energy 2006 (RE2006), October 9 – 13, Makuhari Messe, Chiba, Japan.

    • W. Chen, R. Du and Weigang Guo, “Weld-bead Movement of Multi-Gauge Tailor-Welded Blank During Drawing Square Cup with Reverse-convex,” Proceedings of MSEC2006, 2006 ASME International Conference on Manufacturing Science and Engineering, paper No. MSEC2006-21035, October 8-11, 2006, Ypsilanti, MI, USA.

    • W. Chen, B. Hou, Z. J. Liu and R. Du, “A Study on Multi-Stage Sheet Metal Forming for Automobile Structure-Pieces,” Third International Conference on Advanced Forming and Die Manufacturing Technology (AFD2006), Sept. 4 – 6, 2006, Busan, Korea.

    • R. Du, “The Science and Art of Mechanical Movement,” 2006 International Mechanisms and Machine Science Conference (2006 CCMMS), Yingchuan, China, Aug. 14 – 16, 2006, Keynote presentation.

    • Y. Fu and R. Du, “A Study on the Swiss Lever Mechanism,” 2006 International Mechanisms and Machine Science Conference (2006 CCMMS), pp. 308 – 311, Yingchuan, China, Aug. 14 – 16, 2006.

    • Etta C. Y. Liu and R. Du, “ "Frame-Based Expert System for Label Pattern Design", Best Student Paper, Proceedings of the 10th WSEAS International Conference on Computers, pp. 795-799, Vouliagmeni, Athens, Greece, July 13-15, 2006.

    • J. Liang, S. M. Xu, Y. J. He, and R. Du, “Design and Experimental Investigation of a Diffusion Absorption Refrigeration System,” (Paper No. ESDA2006-95130), 8th Biennial ASMA Conference on Engineering Systems Design and Analysis (ESDA 2006), Torino, Italy, July 4 – 7, 2006.J. Leng and R. Du, “A CAD Approach for Designing Customized Shoe Last”, CAD06’, Phuket, Thailand, June 21 – 23, 2006.

    • Liu Chungyan, Zhang Yitong and R.Du, "Modeling and Analysis of Weaving Labels,” Int. Conf. for Frontier of Design and Manufacturing (ICFDM) 2006, Guangzhou, China, June 18 – 23, 2006.

    • P. H. Ko and R. Du, “Nanobearing A New Type of Air Bearing with Flexure Structure,” Int. Conf. for Frontier of Design and Manufacturing (ICFDM) 2006, Guangzhou, China, June 18 – 23, 2006.

    • Sun Yazhou, Liang Yingchun, and R. Du, “Experiment Study of Surface Roughness in Micro-Milling Process,” 2006 Int. Conference on Micro/Nano Fabrication Technologies, Bangkok, Thailand, May 2006.

    • Sun Yazhou, Yingchun Liang, Ruxu Du, “Micro-milling: Simulation of Surface Generation and Experimental Analysis of Surface Roughness,” World Science and Engineering Academic Society (WSEAS) 2006, Paper No. 5531-801R, Hangzhou, China, April 2006.

    • J. Liang and R. Du, “A Study of the Model-Based Fault Detection and Diagnosis for HVAC Systems,” Innovative Equipment and Systems for Comfort and Food Preservation, Auckland, New Zealand, Feb. 16 – 18, 2006.


    • 2005

    • Q. F. Wang and R. Du, “A DNA Algorithm for Feature Selection in Condition Monitoring of Manufacturing Processes,” Proceedings of 2005 Int. Symposium on Intelligent Signal Processing and Communication Systems, Hong Kong, Dec. 13 – 16, 2005.

    • K. He and R. Du, “A Simple Parameter Calibration Method for a Novel Controllable Mechanical Metal Forming Press,” 2005 International Conference on Advanced Manufacture (ICAM2005), Taipei, November 28 - December 02, 2005.

    • Y. Fu and R. Du, “Finite Element Analysis of the Driving Chain in a Mechanical Watch Movement,” Int. Symposium on Collaborative Research in Applied Science, Vancouver, Canada, October 7-9 2005.

    • W. Z. Guo and R. Du, “On the Mobility of Single Loop N-Bar Linkage with One Prismatic Joint,” ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, California, USA, September 24-28, 2005.

    • K. He, Z. L. Jin, and R. Du, “On the Design of a Novel Controllable Mechanical Metal Forming Press Based on 2-D Planar Mechanism,” ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, California, USA, September 24-28, 2005.

    • J. Liang and R. Du, “Thermal Comfort Control Based on Neural Network for HVAC Applications,” Proceedings of 2005 IEEE Conference on Control Applications 2005, pp. 819-824, Toronto, ON, Canada, Aug. 29-31, 2005.

    • Maolin Yu and R. Du, “Sensitivity Analysis for Sheet Metal Stamping Based on Inverse Finite Element Modeling,” 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 05), Ann Arbor, MI, USA, Aug.15 – 19, 2005.

    • Y. Huang and R. Du, “On the Development of Multi-Step Inverse FEM with Shell Model,” 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 05), Ann Arbor, MI, USA, Aug. 15 – 19, 2005.

    • Harry Y. M. Ng and R. Du, “Diagnosis of Sheet Metal Stamping Processes based on Thermal Energy Distribution,” The 2005 IEEE Conference on Automation Science and Engineering, Edmonton, Canada, August 1-2, 2005.

    • Yiu-Ming Harry Ng, and R. Du, “Acquisition of 3D Surface Temperature Distribution of a Car Body,” Proceedings of IEEE International Conference on Information Acquisition 2005, pp. 16-20, Hong Kong, China, 27 June - 3 July, 2005.

    • J. Leng and R. Du, “A Deformation Method for Shoe Last Customization,” Computer-Aided Design and Applications, Vol. 2, Nos. 1-4, CAD'05, Bangkok, Thailand, 2005.

    • Y. Huang, Y.P. Chen, and R. Du, "A New Method to Realize the Multi-step Inverse Finite Element Analysis in Sheet Metal Stamping," Proceedings of The 8th ESAFORM Conference on Metal Forming (ESAFORM2005), Cluj-Napoca, Romania, Apr. 27-29, 2005.


    • 2004

    • Harry Y. M. Ng and R. Du, “Acquisition of Surface Thermal Distribution in Sheet Metal Forming,” Proc. of the 11th IEEE Int. Conf. on Mechatronics and Machine Vision in Practice, Macau SAR, China, Nov. 30 – Dec. 2, 2004.

    • J. Liang, R. Du, K. Yeung, J. Tsou and A. Lee, “Development and Experiment Investigation on Smart Wall,” HPC2004, Cyprus, Oct. 2004.

    • Y. M. Ng and R. Du, “Reconstruction of 3D Thermal Distribution from Infrared Images”, (Paper ID: PH_07), First Asia International Symposium on Mechatronics (AISM 2004), Xi’an, China, Sept. 2004.

    • K. Yeung, H. Y. Lau, and R. Du, “Remote Injection Molding Machine Monitoring and Management System,” First Asia International Symposium on Mechatronics (AISM 2004), Xi’an, China, Sept. 2004.

    • Y. Huang, Y. P. Chen, and R. Du, “A Study on the Effect of Punch Trajectory in Sheet Metal Stamping Using Implicit Dynamic Finite Element Simulation,” The Sixth World Congress on Computational Mechanics, Beijing, China, Sept. 2004.

    • M. L. Yu, Y. P. Chen and R. Du, “Quality Prediction and Die Design Optimization for Sheet Metal Stamping Using Monte Carlo Simulation and Inverse Finite Element Modeling,” The Sixth World Congress on Computational Mechanics, Beijing, China, Sept. 2004.

    • J. Cheng and R. Du, “A New Method for Characterizing the Dynamic Force in Gait,” 4th America Podiatry Medicine Annual Meeting, Boston, MI, USA, Aug. 2004.

    • Y. Huang and R. Du, “A Study on the Tonnage Signal Using Finite Element Method,” (Paper ID: UL-004) 2004 Japan-USA Joint Conference and Flexible Automation, Colorado, USA, July 21 – 25, 2004.

    • R. Du, K. He, Z. L. Jin and W. Z. Guo, “The Next Generation Metal Forming Press,” (keynote paper and the best paper), The 14th (Chinese) National Conference on Mechanisms, Chongqin, China, July 9 – 13, 2004.

    • W. Z. Guo, R. Du and H. J. Zou, “Motion Controllability and Classification of Modern Machines” (Paper No. MCD 12-70), The 14th (Chinese) National Conference on Mechanisms, Chongqin, China, July 9 – 13, 2004.

    • H. Y. Lau, X. Li, K. Yeung and R. Du, “A New Method for Predicting the Part Quality in Plastic Injection Molding Using Radial Basis Function Artificial Neural Network (RBFANN),” The 6th International Conference on Frontiers of Design and Manufacturing, Paper No. 098, Xi’an, China, June 21 – 23, 2004.

    • H. Y. Lau, X. Li and R. Du, “Predicting Nozzle Pressures in Plastic Injection Molding Processes,” 2004 Automation & Assembly Summit Conference, Fort Worth, TX, May 2004.

    • Y. S. Xu, M. Ge and R. Du, “A Real-Time Monitoring and Diagnosis System for Manufacturing Automation”, IEEE International Conference on Robotic and Automation 2004, (nominated as the best paper), New Orleans, Louisiana, USA, April 26 - May 1, 2004.


    • 2003

    • X. Li, Y. S. Xu and R. Du, “Latent Process Model and Condition Monitoring in Stamping,” IEEE IAC 2003, Hong Kong, Dec. 2003.

    • G. C. Zhang and R. Du, “Extracting Fault Features Using Integrated Bispectrum,” IEEE International Conference on Robotics, Intelligent Systems and Signal Processing, Changsha, Hunan, China, Oct. 2003.

    • M. Ge, R. Du and Y. S. Xu, “Fault Detection Using Hierarchical Self-Organizing Map,” IEEE International Conference on Robotics, Intelligent Systems and Signal Processing, Changsha, Hunan, China, Oct. 2003.

    • X. Li, R. Du, B. Denkena, J. Imiela, “Use Current of the Linear Motor for Condition Monitoring in Milling,” IEEE International Conference on Robotics, Intelligent Systems and Signal Processing, Changsha, Hunan, China, Oct. 2003.

    • K. Yueng, W. Z. Guo, and R. Du “The Prototype of a New Metal Forming Press Using Controllable Mechanism,” CIRP 2nd International Conference on Reconfigurable Manufacturing, Ann Arbor, MI, USA, August 2003.

    • Xiaoli Li, R Du and X. Guan, “The Damping time of EEG with Information Retrieve and Autoregressive Models,” 5th IFAC symposium on Modeling and Control in Biomedical Systems, Sydney, Australia, Aug. 2003.

    • W. Z. Guo and R. Du, “Trajectory Planning of a New Mechanical Press with Controllable Mechanism,” Robotics and Applications 2003, Salzburg, Austria, June 2003.


    • 2002

    • K. Yueng, B. Jacques and R. Du, “Playing Tic-Tac-Toe with Robot on the Internet,” The 2002 International Conference on Engineering Education, Manchester, England, August 2002.

    • Ming Ge, Guicai Zhang, R. Du and Yangsheng Xu, “Application of Support Vector Machine Based Fault Diagnosis,” Proceedings of 15th IFAC World Congress, Barcelona, Spain, July 21 – 26, 2002.

    • W. Z. Guo and R. Du, “Conceptual Design of Mechantronic Products and Systems with Motions,” The 2002 Int. Multi-conferences in Computer Science, Las Vegas, USA, June 2002.

    • W. Z. Guo and R. Du, “A New Design of Metal Forming Press with Controllable Mechanism, Part I: the Model” Japan – USA Symposium on Flexible Automation, Japan, July 2002, Hiroshima.

    • R. Du and Y. S. Xu, “On-Line Monitoring of Sheet Metal Stamping Operations,” The 5th S. M. Wu Conference on Manufacturing Science and Engineering, June 2002, Dalin, China.

    • Jérôme Tomasini, R. Du, “Energy Efficient Manufacturing for Mass Production Lines” 2002 International Conference on Control and Automation, Xiemen, China, May 2002.


    • 2001

    • W. Gong, A. Calabia, and R. Du, “Automatic Robot Path Generation for Welding on Sculpture Surfaces,” Robotics and Applications 2001, Tampa, FL, USA, Nov. 2001.

    • Guicai Zhang, Ming Ge, R. Du and Yangsheng Xu, “Feature Extraction for Stamping Operation Monitoring Using Bispectral Analysis,” Proceedings of the 2001 International Conference on Computational Intelligence for Modeling Control and Automation, pp. 294 – 303, 9 – 11, July, 2001, Las Vegas, USA.

    • R. Du, Ying Liu, and et al, "Tool Condition Monitoring Using Transition Fuzzy Probability," Proceeding of the Third International Conference on Metal Cutting and High Speed Machining, June 27-29, 2001, Metz, France.

    • Juhchin Yang, V. Jaganathan, and R. Du, "A Study on the Stability of Drilling and Reaming." Proceeding of the Third International Conference on Metal Cutting and High Speed Machining, June 27-29, 2001, Metz, France.

    • M. Ge, G. C. Zhang, R. Du, and Y. S. Xu, “A Study on the Dynamics of Stamping Processes Using Wavelet Packet Transform,” The Proceedings of the ICMT and ACRA 2001, pp. 310-315, Singapore, June 6~8, 2001.


    • 2000

    • R. Du, "The Science of Industrial Sewing, "Proceeding of the 4th Int. Conference on Frontier Research in Manufacturing (4th S. M. Wu Symposium on Manufacturing Science), June 17-20, 2000, Hangzhou, China.


    • 1999 and before

    • H. Zhang, R. Du and A. T. Alpas, "Deboundation of Reinforcement Particulate from Metal Matrix in PMMC during Cutting Process," Proceeding of the 2nd International Conference on Composites, Oct. 31-Nov. 5, 1999, Lake Louise, Alberta, Canada.

    • H. Zhang, R. Du and A. T. Alpas, "SEM Study of Debondation of Reinforcement Particulate in Metal Matrix Composite Materials," Proceeding of the 38th International Conference of Metallurgist, Quebec City, QC, Canada, August 22-26, 1999.

    • Q. Li, E. Liasi, R. Du and etc., "Heating of Industrial Sewing Machine Needles: FEA Model and Verification Using IR Radiometry," The Proceedings of the SPIE 99, (best paper), Cleveland, OH, USA, 1999.

    • H. Zhang, R. Du and A. T. Alpas, "Localization of plastic deformation of ductile Materials During Chip Formation," Proceeding of the 11th Canadian Materials Science Conference, pp. 16-18, June 1999, Kingston, Ontario, Canada.

    • H. Zhang, A. T. Alpas, and R. Du, "A Study on the Machining of Particulate Reinforced Metal Matrix Composite Materials," The Proceeding of the 10th Canadian Materials Science Conference, 9-12 June 1998, Kingston, Ontario, Canada.

    • Minping Jia & R. Du, “Diagnosis of Large Rotating Machinery Using Evolutionary Spectrum,” Proceedings of the 1998' International Mechanical Engineering Congress and Exposition, Dec. 1998, Anaheim, CA, USA.

    • Wenwei Gong & R. Du, “Automatic Robot Path Generation for Manufacturing on Sculpture Surfaces,” Proceeding of the 5th International Conference on Mechatronics and Machine Vision in Practice, Sept. 1998, Nanjing, Jiansu, China.

    • E. Mallet & R. Du, “A Study on the Industrial Sewing Processes Using Finite Element Analysis,” Proceeding of the 3rd S. M. Wu Symposium on Manufacturing Scienc, June 1998e, Wuhan, Hebai, China.

    • E. Liasi, R. Du, F. Liburdi, J. Bujas-Dimitrejeci & D. Simmon, "Heating of an Industrial Sewing Machine Needle," Thermal Solutions '97, Cleveland, Ohio, USA, June 1997.

    • J. Jouraij, A. J. C. Yang & R. Du, "A Study on the Dynamics of Tool Holders," Proceeding of the 1997' International Mechanical Engineering Congress and Exposition, MED Vol. 1, Dollars, TX, USA, Nov. 1996.

    • M. J. Ma & R. Du, "Smart Drilling - A Fuzzy Decision System for Planning Drilling Operations," Proceedings of the International Conference on Manufacturing Automation (ICMA '97), Hong Kong, Vol. 1, pp. 196 - 201, May 1997.

    • Yuedong Chen & R. Du, "Diagnosing Spindles Using 4D Holospectrum," 1996' International Mechanical Engineering Congress and Exposition, MED Vol. 1, Atlanta, GA, USA, Nov. 1996.

    • Fan Li & R. Du, "A New Method for 5D Finish Machining of Dies and Molds," Proceedings of CSME, 13th Symposium on Manufacturing Science and Engineering, pp. 329-337, 1996.

    • Hui Li & R. Du, "Optimizing Tool Path for 2(1/2)D Milling of Dies and Molds," Proc. of CSME, 13th Symposium on Manufacturing Science and Engineering, pp. 338-351, Hamilton, Ont., Canada, 1996.

    • Z. Liu & R. Du, "Modeling and Analysis of Sewing Operations," Proc. of the 2nd S. M. Wu Symposium on Manufacturing Science, Shanghai, China, June 1996.

    • R. Du, W. North & G. Qu, "Rapid Surface Finish Measurement Using Laser Optics," Proc. of the 2nd S. M. Wu Symposium on Manufacturing Science, Ann Arbor, MI, USA, May 1996.

    • Yuedong Chen, Y. B. Chen & R. Du, "Four Dimensional Holospectrum - A New Method for Analyzing Force Distributions," 1995' International Mechanical Engineering Congress and Exposition, MED Vol. 2-1, MH Vol. 3-1, pp. 547-564, Nov. 1995.

    • Ya Wu & R. Du, "Feature Extraction and Assessment Using Wavelet Packets for Tool Condition Monitoring," Proc. of 8th International Congress on Condition Monitoring and Diagnostic Engineering Management, pp. 305-369, Kingston, Ont., Canada, June 1995.

    • Yuedong Chen, R. Du, "A New Method of Designing Artificial Neural Network for Engineering Monitoring and Diagnosis," 1994' International Mechanical Engineering Congress and Exposition, Symposium on Expert Systems and Artificial Intelligence, DSC-Vol. 55-1, pp. 499-506, San Francisco, CA, USA, Nov. 1994.

    • Yuedong Chen, Liangshen Qu, & R. Du, "Fault Features in Diagnosis of Large Rotating Machinery," Proc. of 13th Canadian Machinery Vibration Association Conference, pp. 127-159, Toronto, Ont., Canada, Sept. 1994.

    • R. Du, "When to Change a Tool? - A Study of Tool Replacement Strategies Using Taguchi's Quality Loss Function," Proc. of First S. M. Wu Symposium on Manufacturing Science, North American Session, pp. 149-152, Ann Arbor, MI, USA, May 1994.

    • Yiying Fan & R. Du, "A Laser Diffraction Method for Rotating Tool Condition Monitoring," Proc. of First S. M. Wu Symposium on Manufacturing Science, Far East Session, pp. 274-278, Beijing, China, June 1994.

    • R. Du, B. Zhang, W. Hungerford, T. Pryor, "Tool Condition Monitoring and Compensation in Finish Turning Using Optical Sensor," 1993 ASME Winter Annual Meeting, Symposium of Mechatronics. DSC-Vol. 50/PED-Vol. 63, pp. 245-253, Chicago, IL, USA, Nov. 1993.

    • R. Du, A. Hui & K. D. Metcalfe, "Optimal Design of Cutting Conditions for Transfer Machining Systems," Proceedings of the 2nd Industrial Engineering Research Conference, pp. 360-364, Los Angeles, CA, May 1993.

    • S. Li, M. A. Elbestawi & R. Du, "A Fuzzy Logic Approach for Multi-Sensor Process Monitoring in Machining," 1992 ASME Winter Annual Meeting, PED-Vol. 55, pp. 1-16, New Orleans, AL, USA, Dec. 1992.

    • R. Du, J. M. Tarajos, B. K. Gawlik, "A New Strategy of Preventive Monitoring with an Application in Tool Wear Monitoring in Turning Using Cutting Forces," Proceedings of the 5th International Conference on Production Engineering, Design & Control, Alexandria, Egypt, Dec. 1992.

    • F. Ismail, M. A. Elbestawi, R. Du & K. Urbasik, "Generation of Milled Surfaces Including Tool Dynamics and Wear," 1992 ASME Winter Annual Meeting, PED-Vol. 52, Dec. 1992.

    • M. A. Elbestawi, F. Ismail, R. Du & B. C. Ullagaddi, "Modeling Machining Dynamics Including Damping in the Tool-Workpiece Interface," 1991 ASME Winter Annual Meeting, Symposium of Tribological Aspects, Dec. 1991.

    • R. Du, D. Yan & M. A. Elbestawi, "Using Time-Frequency Distribution of AE signals for Tool Wear Detection in Turning," Proceedings of 4th World Meeting on Acoustic Emission, pp. 269-285, Boston, MA, U. S. A. Sept. 1991.

    • R. Du, B. C. Ullagaddi & M. A. Elbestawi, "An Analysis of Chatter in Milling Using Phase Lag between Cutting Force and Table Vibration," 1990’ Proceeding of JSME Annual Conference, pp. 26-32, June 1990.

    • R. Du & S. M. Wu, "Threshold Estimation for On-line Failure Detection of Machining Processes," Proceeding of the Manufacturing International '90, Vol. 5, pp. 35-41, June 1990.

    • R. Du, "A New Approach for Discrete-time System Reduction," (in Chinese), The 5th Annual (Chinese) National Automation Conference, 1985.

    • R. Du, "A New Method for Computing Optimal Bang-Bang Control," (in Chinese), The 4th Annual (Chinese) National Automation Conference, 1984.


    Patents


    • 孙蓉、于淑会、杨文虎、杜如虚,中国发明专利:带通滤波器,国际专利,PCT/CN2012/081204。

    • 杜如虚、王大志、何凯,中国发明专利:“并联跟踪平台,”申请号:2012101519261.0。

    • 王书付、于文泽、段晓威、何凯、杜如虚,中国发明专利:“自动称重分拣装置,”申请号:2012101329040。

    • 于文泽、罗昌杰、梅明、王书付、刘天宝、何凯、杜如虚,中国发明专利:金属蜂窝芯的波纹箔材的成形装置及方法,”申请号:2012103055651。

    • 罗昌杰、于文泽、梅明、王书付,刘天宝、何凯、杜如虚,中国发明专利:“一种金属蜂窝半正六边形波纹结构成形装置的组装装置,”申请号:201210460003.4。

    • 何凯、李赳华、李莉莉、杜如虚,中国发明专利:“调温装置,”申请号:201210355400.5。

    • 何凯、李赳华、李莉莉、杜如虚,中国实用新型专利:“调温装置,”申请号:2012204865327。

    • 何凯、罗昌杰、王书付、杜如虚,中国实用新型专利:“珠链自动化成形设备,”申请号:2012203140838.0。

    • 孙蓉、于淑会、杨文虎、杜如虚,PCT国际发明专利:“带通滤波器,”申请号:PCT/CN2012/081204。

    • 孙蓉、于淑会、杨文虎、杜如虚,中国发明专利:“带通滤波器,”申请号:2012100724589。

    • 陈顺权、陈静、杜如虚,中国实用新型专利:“纯净水制取装置,”申请号:201220672959.6。

    • 金建、邸思、姚豫培、陈贤帅、杜如虚,中国发明专利:“一种多通道集成滤光片的制作方法,”申请号:201210314467.4

    • 邸思、杜如虚、金建、姚豫培、唐观荣、陈贤帅,中国发明专利:“一种多光谱图像捕捉系统,”申请号:201210185849.1

    • 唐观荣、陈秋兰、杜如虚、邸思、金建、陈贤帅,中国发明专利:“一种微机电系统电导率传感器的接口电路,”申请号:201210546068.0

    • 金建、邸思、姚豫培、陈贤帅、杜如虚,中国实用新型专利:“一种多通道集成滤光片,”申请号:201220436461.x

    • 邸思、杜如虚、金建、姚豫培、唐观荣、陈贤帅,中国实用新型专利:“一种多光谱图像捕捉系统,”申请号:201220266365.5

    • 唐观荣、陈秋兰、杜如虚、邸思、金建、陈贤帅,中国实用新型专利:“一种微机电系统电导率传感器的接口电路,”申请号:201220694281.1

    • 王映品、陈贤帅、张弓、周雪峰、杜如虚、李凯格,中国发明专利:“一种多轴传动的立体刀架,”申请号:201210483619.3

    • 王映品、陈贤帅、周雪峰、张弓、杜如虚,中国实用新型专利:“一种多轴传动机构,”申请号:201220625694.4

    • 于淑会、孙蓉、王依海、赖茂柏、赵涛、张治军、杜如虚,中国发明专利:“一种聚合物基复合电介质材料及平板型电容器,”申请号:200810216176.5,授权公告日:2012.6.20。

    • 王依海,孙蓉,赖茂柏,吴晓琳,于淑会,杜如虚,中国发明专利:“具有调温功能的高分子复合纳米材料及其制备方法,”申请号:授权公告日:2012.7.4。

    • 杜如虚等,中国发明专利:“一种在线监控药物生产混合过程的方法,”申请号:200710077549,授权公告日:2012.2.22。

    • 王书付、于文泽、段晓威、何凯、杜如虚,中国发明专利:“自动称重分拣装置,”申请号:2012101329040。

    • 孙蓉、于淑会、杨文虎、杜如虚,中国发明专利:“带通滤波器,”申请号:2012100724589。

    • 于文泽、罗昌杰、刘天宝、何凯、梅明、龚理、杜如虚,中国发明专利:“蜂窝芯半格结构层叠方法及装置,”申请号:201110387532.1。

    • 郭亮、吴世凯、杜如虚, 中国发明专利:“一种荧光定量PCR检测AAPP的方法,”申请号:201110432707.6。

    • 何凯、李赳华、毛贺、罗群、李全昌、杜如虚,中国发明专利:“板材高压水射流柔性渐进成形方法及装置,”申请号:201110347675.X。

    • 何凯、欧协锋、刘鹏、杜如虚, 中国发明专利:“智能仿生机器海豚,”申请号:201110089971.4。

    • 何凯、欧协锋、刘鹏、杜如虚,中国发明专利:“正弦推进机构,”申请号:201110089967.8。

    • 何凯、欧协锋、杜如虚,中国发明专利:“机器人臂部件及机器人,”申请号:201110193084.1

    • 谢小辉、那奇、杜如虚等,中国发明专利:“介入治疗辅助机械臂,”申请号:201110193084.1。

    • 罗昌杰,杜如虚,荀大伟,何凯,中国外观专利:“飞蛾形黄金饰品,”申请号:201130123628.8。

    • 罗昌杰,杜如虚,荀大伟,何凯,中国外观专利:“蝴蝶形黄金饰品,”申请号:201130123558.6。

    • 罗昌杰, 何凯, 荀大伟, 杜如虚,中国发明专利:“金属蜂窝制造设备及制造方法,”申请号:2011101561546。

    • 罗昌杰, 何凯, 荀大伟, 杜如虚,中国发明专利:“蜂窝式碳纤维吸能器及其制造方法和制造设备,”申请号:2011101698021。

    • 王大志 何凯 杜如虚,中国发明专利:“光刻机调焦调平机构以及光刻机调平机构,”申请号:2011101822781。

    • 罗昌杰、何凯、荀大伟、于文泽、杜如虚,中国发明专利:“铺放头装置,”申请号:2011102718516。

    • 罗昌杰、何凯、荀大伟、于文泽、杜如虚,中国发明专利:“碳纤维铺放设备,”申请号:2011102980405。

    • 何凯、李赳华、毛贺、罗群、李全昌、杜如虚,中国发明专利:“一种金属板材高压水射流柔性渐进成形方法及装置,”申请号:201110347675.X。

    • 何凯,毛贺,李赳华,李全昌,杜如虚,中国实用新型专利:“机床防水装置,”申请号:2011204316359。

    • 杜如虚,梁坚,中国发明专利:“节能型热舒适控制器及控制方法,”专利号: ZL200610128692。

    • 何凯、李赳华、欧协锋、杜如虚,中国发明专利: “一种组合式取胚冷却装置及其方法,”申请号:201010046551.3。

    • 王大志、罗远新、何凯、杜如虚,中国实用新型专利:“单点无模成形活动支撑装置,”申请号:201020216520.3。

    • 于淑会、孙蓉、罗遂斌、赵涛、杜如虚,中国发明专利:“复合电介质材料及其制备方法,”申请号:201010178458.8

    • 于淑会、孙蓉、罗遂斌、赵涛、杜如虚,中国发明专利:“复合电介质材料及其制备方法,”申请号:201010178458.8。

    • 杜如虚、郁毛林、伍耀明、陶伟洪,中国发明专利:“金属冲压过程中的诊断方法及其设备,”专利号:ZL20051007548X.

    • R. Du, K. W. Wang and et al,中国发明专利: “Carbon nanotubes/chitosan composite coating on springs for enhanced mechanical properties,”申请号:200810134920.7.

    • R. Du, Z. H. Lan and et al,中国发明专利:“An adjustable force regulator for manufacturing / assembly operations,”申请号: 200710164361X。

    • 杜如虚、赖茂柏、孙蓉、于淑会、冷静,中国发明专利:“一种无机水合盐相变储能材料的制备方法,”申请号: 200810065301.7。

    • 谢小辉、于淑会、冷静、孙蓉、杜如虚,中国发明专利:“一种压力电感应式电子称重的测量电路及装置,”申请号: 200810065302.1。

    • 赖茂柏、杜如虚、孙蓉、于淑会、冷静,中国发明专利,“一种界面聚合法制备的相变储能胶囊及其方法,”申请号: 200810068422.7。

    • 孙蓉,杜如虚,冷静,赵涛,中国发明专利,“一种润滑油添加剂及其制备方法,”申请号:200710075247.X。

    • 毕亚雷、徐洪奎、杜如虚, 中国发明专利:“一种生成检索词条的方法及数据检索方法和系统,”申请号:200810066314.6。

    • 杜如虚,徐洪奎,张卉,马翠,彭振兴,皮骄阳,冷静,“一种在线监控药物生产混合过程的方法及系统” 中国发明专利,申请号: 200710077549。

    • 马伟,杜如虚,中国发明专利:“一种可任意方向操作的微操作剪刀,”申请号: 200710075247。

    • 杜如虚,梁坚,梁国昌,陈国耀, 中国发明专利,“节能型热舒适神经网络控制器,”专利号:CA101140450A。

    • R. Du, M. L. Yu, Y. Huang and W. H. To, “Diagnosing Sheet Metal Stamping Operations Using Thermal Imaging and Finite Element Modeling,” China Patent (pending), Sept. 2004.

    • R. Du, Z. L. Jin, W. Z. Guo, K. Yeung, K. He., “The Design of a New Type of Press with Controllable Mechanism,” China Patent 200310107469.7, Nov. 2003,

    • Y. S. Xu, R. Du, H. Tong, M. Ge, G. C. Zhang, and Y. Y. Leung, “Method and System for On-line Monitoring Stamping Operation,” Taiwan Patent No. 170791, January 2003.

    • Y. S. Xu, R. Du, H. Tong, M. Ge, G. C. Zhang, and Y. Y. Leung, “Method and System for On-line Monitoring Stamping Operation,” Chinese Patent No. 01810063.5, November 2002.